Delivered immediately. (Rush Hour available for custom solutions)
Rs.180/- Per Kg Get Latest Price
Product Details:
Anodised | Yes |
Alloy Or Not | Is Alloy, Non-Alloy |
Condition | New |
Position | Interior, Exterior |
Color | Silver |
Size | 12mm 16mm 20mm 25mm 30mm 35mm 40mm 50mm |
Brand | Indian Extrusions |
Product Description:
Drilled Shaft 16mm with Aluminium Bottom Support. We offer 12mm 16mm 20mm 25mm 30mm 35mm 40mm 50mm MOQ 3 Meter Aluminum Profile Aluminum Section Aluminum Extrusion Linear Aluminum Slide Aluminum Slide Aluminum Guide Aluminum Support Moq 3 Per Meter Linear Aluminum Slide Aluminum Slide Aluminum Guide Aluminum Support.
Aluminium Bottom Support with Linear Shaft
Aluminium Bottom Support with Hard Chrome Plated Rod.
>
>
>
CALL US WITH ANY QUESTION!
+91 9591811888
Usage/Application | Commercial |
Shape | T-Profile |
Material | Aluminium |
Position | Interior, Exterior |
Height | 5-7 Feet |
Anodised | Yes |
Brand | Indian Extrusions |
Position | Interior, Exterior |
Color | Silver |
Anodized | Yes |
Alloy Or Not | Is Alloy |
Condition | New |
Size | Customized, 20mm |
Size | 12x12x1.2 (in mm) |
Design | Standard |
Anodised | Yes |
Length | 2700 mm |
Minimum Order Quantity | 1 Piece |
Brand | Baux |
Size | 18x18x1.2 (in mm) |
Design | Standard |
Anodised | Yes |
Length | 2700 mm |
Minimum Order Quantity | 1 Piece |
Usage/Application | Commercial |
Shape | T-Profile |
Material | Aluminium |
Position | Interior, Exterior |
Height | 5-7 Feet |
Vehicle Model | BAJAJ COMPACT AUTO RICKSHAW |
Brand | FIBRE XPREIndian Extrusions |
Material | FRP, FIBER GLAIndian Extrusions |
Color | Multicolor |
Usage | AUTO RICKSHAW TOP |
Is It Waterproof | Waterproof |
Surface Finishing | PAINT |
Minimum Order Quantity | 1 Piece |
Size | 12x12x1.2 (in mm) |
Design | Standard |
Anodised | Yes |
Length | 2700 mm |
Minimum Order Quantity | 1 Piece |
Material | Aluminium |
Thickness | 2-5mm |
Alloy Or Not | Is Alloy |
Length | 6-12 meter |
Material | Aluminium Acoustic |
Surface Treatment | Powder Coated |
Height | 6-7 Feet |
Usage/Application | Office |
We manufacture Aluminium fascias for individual product, project or as part of a combined system – uniquely designed, specified and fabricated for your specific project needs.
Aluminium fascias can act as a cladding, wrapped around a concealed gutter or act as a stand-alone fascia incorporating an external gutter.
While Aluminium metal offers high water and air resistance. The additional corrosion resistant qualities make Aluminium fascias incredibly low maintenance with a long lifespan. Unlike other materials, swelling, cracking, and rotting is simply not possible with Aluminium fascias.
Aluminum fascia and soffit panels offer a budget-friendly solution, particularly over the long haul, requiring minimal upkeep and boasting superior durability compared to alternative materials. Tailored dimensions and profiles are also at your disposal upon request. Feel free to reach out to us for pricing details. We guarantee you the best pricing in the industry for Aluminium fascias.
Select a high-quality paint specifically formulated for aluminum fascia. Choose a 100% acrylic paint without ammonia, ensuring compatibility with your primer and enamel. Opt for a variant with UV protection to enhance paint longevity and minimize sun-induced damage to your gutters.
To safeguard surrounding surfaces during soffit and fascia painting, consider using drop cloths or painter's tape. Apply one or two coats of paint until achieving the desired outcome.
When dealing with Aluminum Fascia or any trim profile with an exposed surface exceeding 8 inches, enhance its rigidity by incorporating a rib. Begin by orienting the show side upward and executing an initial 30-degree bend. Rotate the piece, now with the show side facing downward, and introduce another 30-degree angle. Reverse the orientation once more, folding it back by approximately 30 degrees to align the fascia's face in a straight configuration. It's worth noting that the cumulative angle of 30 degrees thrice may not equate to 180 degrees due to the shifting reference point with each bend.
The drawbacks associated with Wood Fascia lead numerous property owners to explore Aluminum Fascia as a viable alternative. Opting for aluminum fascia and soffit proves advantageous due to its lightweight nature and minimal maintenance requirements. High-quality aluminum materials resist corrosion, fading, and cracking, even when subjected to harsh weather conditions.
To cut aluminum fascia lengthwise, a straightforward method involves scoring the panel with a scoring knife and then bending the panel back and forth until the metal breaks along the scored line. It's important to wear goggles, especially when cross-cutting with a power saw, to ensure safety during the cutting process. This technique allows for a clean and controlled cut along the desired length of the aluminum fascia.
Cleaning Aluminium Fascis is simple and starightforward. A soft bristle brush is all that's required for regular cleaning. For more stubborn dirt on soffits and fascia, you can utilize a mixture of water and common household detergent with the soft bristle brush, effectively removing any pollutants without causing harm to the surface.
You should always use a "nail-less" installation technique for installing Aluminium Fascia. This involves securing F-channel to the bottom edge of the subfascia and utility trim beneath the drip edge, ensuring a secure hold on the fascia material while allowing flexibility for expansion and contraction with temperature changes (see Figure 2).
Create locking tabs on the top edge of preformed fascia using a snap-lock punch, and then insert the fascia into the utility trim. These tabs serve to prevent the fascia from dislodging while still permitting unrestricted movement. Many contractors opt to shape their fascia on-site using painted aluminum coil stock, which is thinner than factory fascia (.019 vs. .024 inch thick). In such cases, it is essential to form a continuous locking hem on the top edge and insert it into the utility trim.
To prevent the downward movement of rake fascia, slot punch the bottom edge of the fascia and secure it in place with three or four aluminum trim nails driven into the subfascia. These slots enable longitudinal expansion and contraction of the fascia without causing buckling.
It is crucial to avoid having aluminum fascia make sharp turns at corners. Instead, incorporate small inserts at all inside and outside corners, breaking the fascia at these points. These inserts serve as a backdrop, concealing the wood subfascia and maintaining a seamless appearance at corner joints.
For optimal installation of aluminum fascia, especially in darker colors, it is crucial to conduct the installation on a hot day with direct sunlight on the fascia. This precaution ensures that the fascia has expanded to its maximum extent before being installed. The goal is to avoid any limitations on expansion post-installation, as restricted expansion is a common cause of waviness in the fascia.
Yes, aluminum fascia can be secured using staples. According to the instructions you provided, you can secure the aluminum soffit panels to the bottom of the fascia board using either 1-inch aluminum trim nails or staples. The key is to use these fasteners to ensure a secure and flush installation of the panels. Always follow the specific guidelines and recommendations provided by the manufacturer for the best results and to maintain the structural integrity of the installation.
Material | Aluminium |
Thickness | 1-5 mm |
Anodised | Yes |
Weight | 200-500 gram |
Surface Treatment | Powder Coated |
Material | Aluminium |
Surface Treatment | Polished |
Shape | Rectangular |
Technique | Hot Rolled |
Brand | TAG |
Door Height | Up to 2200 mm |
Door Width | Up to 550 mm |
Finish | Alu. Matt. S. S. Brush Matt |
Standard Length | 3 Mtr |
Thickness Of Glass / Panel | 4 To 5 mm |
Width | 20 mm |
Minimum Order Quantity | 3 Meter |
Frame Material | Aluminum |
Shape | Rectangular |
Usage/Application | Home,Office |
No Of Doors | Two Door |
Height | 4 Feet |
Shape | angles |
Material | aluminium |
Surface Treatment | forging |
Finishing | high tensile |
Minimum Order Quantity | 50 Kilogram |
Material | Aluminium |
Shutter Type | Sliding |
Thickness | 6 mm to 8 mm |
Treatment | Pickled |
Usage | Door Fitting |
Opening Pattern | Horizontal |
Open Style | Automatic, Hinged, Swing, Sliding |
Type of Aluminium Sliding Window | SLIMLINE |
Door Material | Aluminium |
Frame Material | Aluminium Alloy |
Surface Finish | Finished |
Glazing Options | 43 MM |
Design Type | ITALY |
Brand | Indian Extrusions |
Mosquito Indian Extrusionsh Profile | YES |
Condition | New |
Height |
Shape | Rectangular |
Height | 4-5 Feet |
Material | Aluminium |
Surface Finish | Powder Coated |
Thickness | 50-100 mm |
Brand | Indian Extrusions |
Material | Aluminium |
Position | Interior, Exterior |
Is It Anodized | Anodized |
Surface Treatment | Coated |
Corrosion Resistnace | Yes |
Shape | C |
Thickness | 2-5 mm |
Material | Aluminium |
Surface Treatment | Galvanized |
Length | 15-20 Feet |
Material | Aluminium |
Anodised | Yes |
Position | Interior |
Height | 35mm |
Length | 3 Meter |
Width | 20.5mm |
Minimum Order Quantity | 50 Piece |
Open Style | Hinged |
Glass Thickness | 5-15mm |
Size/Dimension | 5 Feet X 3 Feet |
Frame Material | Aluminium |
Application | Home, Hotel, Office |
Thickness | 2.5 mm |
Frequency | 50 to 60 Hz |
Efficiency | 85% |
Length | 4ft |
Lumens | 4000 lm |
Product code | SRV LR40 |
Usage/Application | Hand Railing, Door, Window |
Material | Aluminium |
Weight | 700 Gram-2 kg sec |
Surface Finishing | Polished |
Thickness | 2-5 mm |
Open Style | Sliding |
Frame Material | Aluminium |
Surface Finish | Polished |
Frame Color | White |
Glass Thickness | 5mm |
Material | Aluminum |
Surface Treatment | Galvanized |
Technique | Extrusion |
Length | 3 to 6 M |
Anodized | Yes |
Material | Aluminium |
Shape | Angle |
Finishing | Color Coated |
Length | 3 to 12 meter |
Thickness | 3-5 mm |
Color | White |
Frame Material | Aluminum |
Shape | Rectangle |
Opening Pattern | Horizontal |
Open Style | Sliding |
Condition | New |
Brand | Indian Extrusions |
Anodised | Yes |
Position | Interior, Exterior |
Alloy Or Not | Is Alloy |
Size | 96mm |
Finish | Polished |
Material | Aluminium |
Color | Grey |
Brand | Indian Extrusions Aluminium |
Usage/Application | Aluminum Extruded Profiles |
Product Type | Aluminium Door Sections |
Surface treatment | Powder Coated |
Open Style | Sliding |
Opening Pattern | Vertical |
Frame Material | Aluminum |
Height | 2-5 Feet |
Design | Modern |
Glass Type | Toughened Glass |
Size | 7- 10 feet |
Frame Material | Aluminium |
Material | Aluminium |
Color | Natural |
Size | All |
Is It Anodised | Anodised |
Usage/Application | Raw Material |
Features | Industrial |
Minimum Order Quantity | 100 Kilogram |
Alloys (IIndian Extrusions) | Equivalent alloys (AA) | Copper | Magnesium | Silicon | Iron | Manganese | *Others (Total) | Remarks | |||||
Old | New | U.S.A | Min. | Max. | Min. | Max. | Min. | Max. | Max. | Min. | Max. | Max | |
1C | 19000 | 1100 | - | 0.10 | - | - | - | 0.5 | 0.6 | - | 0.1 | 0.1 | Aluminium 99.0% Min |
1200 | - | 0.05 |
Material | Aluminium |
Available Width | 610 mm, 763 mm, 915 mm, 2440 mm |
Material Grade | 8011 |
Packaging Type | Roll |
Thickness | 0.3 mm to 20 mm |
Brand | Indian Extrusions |
Color | ALL TYPE |
Is It Anodised | Anodised |
Length | 3 Meter |
Material | Aluminium |
Packaging Type | Box |
Width | 22 mm |
Minimum Order Quantity | 10 Piece |
Shape | Flat |
Material | Aluminum |
Usage/Application | Door and Window Fittings |
Finishing | PE Coated |
Is It Rust Proof | Rust Proof |
Material | Aluminium |
Surface Finishing | Polished |
Features | Corrosion Resistant |
Brand | Indian Extrusions |
Size | 8 Feet Also Available In 12 Feet |
Lumen Output | 100 |
Body Material | Aluminum |
Size | 2 |
Minimum Order Quantity | 2 Meter |
Material | Aluminium |
Shape | Square |
Finishing | Polished |
Alloy | With Alloy |
Thickness | 2 - 5 mm |
Brand | Indian Extrusions, Indian Extrusions, Indian Extrusions |
Opening Pattern | Vertical, Horizontal |
Width | 2-4 Feet |
Length | 4-6 Feet |
Minimum Order Quantity | 10 Square Feet |
Frame Material | Aluminium |
Size/Dimension | 3x5 Feet |
Surface Treatment | Anodized |
Appearance | Modern |
Shape | Rectangle |
No Of Doors | 2 |
Anodised | Yes |
Grade | 2000 Series |
Colour | Silver |
Temper | 6063T6 |
Minimum Order Quantity | 200 Kilogram |
Material | Aluminium |
Shape | Angle |
Brand Name | Light Metals |
Precision | +-0.15mm |
Thickness available | 0.2mm-20mm |
Material | Aluminium |
Brand | V-RAIL |
Size | ALL |
Color | Silver |
Shape | Round, Square, Rectangle |
Weight | Various |
Design | Customise |
Material Grade | Aluminium |
Is It Anodised | Anodised |
Open Style | Sliding |
Opening Pattern | Horizontal |
Frame Material | Aluminium Casting |
Size | 3X3, Also available in 3X2, 4X4, 5X4, 4x6 Sq. Feet |
Shape | Flat, Square, Angle, T-Profile |
Brand | Indian Extrusions, Indian Extrusions & Local |
Material | Aluminium, Conceal, Surface |
Brand | Indian Extrusions -Indian |
Certification | ISI, CE |
Color | Cw Nw Ww Red Green Blue Purple |
Profile Type | Square, Rectangle, Rods/Pipe, Circular |
IP Rating | IP33, IP66 |
Lumen Output | 110-130 |
Body Material | Aluminium |
Light Lumens | 110-130 |
Operating Voltage | 240 |
Surge Protection | 2kv |
Voltage |
Features | Best design |
Minimum Order Quantity | 5 Piece |
Brand | Samarth |
Material | Aluminium |
Color | Silver |
Packaging Type | Carton |
Thickness | 12mm |
Open Style | Hinged |
Size/Dimension | 5 x 1.5 Feet |
Shape | Rectangular |
Surface Finish | Powder Coating |
Minimum Order Quantity | 250 Square Feet |