Delivered immediately. (Rush Hour available for custom solutions)
Rs.180/- Per Kg Get Latest Price
Product Details:
Item Code | CAP 01A |
Brand | Classic |
Dimensions | 45 mm |
Material | Aluminium |
Thickness | 1.2 mm |
Position | Interior |
Alloy Or Not | Is Alloy |
Weight | 1.4 |
Surface Finishing | Anodized, CP Brush, Indian Extrusions Brush |
Size | 10 ft |
Glass Thickness | 1.2 mm |
Color | Anodized, CP Brush, Indian Extrusions Brush |
Product Description:
Aluminium profile avaliable fisished are |
CALL US WITH ANY QUESTION!
+91 9591811888
Minimum Order Quantity | 0 Kilogram(s) |
Thickness(millimetre) | 2 to 4 mm |
Grade | 2000 Series |
Type | Coil |
Surface Treatment | Embossed |
Surface Finish | Polished |
Body Material | Aluminium |
Color | White |
IP Rating | IP55 |
Environment | Indian Extrusionsor / Outdoor |
Housing | Indian Extrusions Sheet |
Outer Size | 1450x300x60 mm |
THD | Less than 10% |
Minimum Order Quantity | 50 Unit |
Material | Aluminium |
Thickness | 2-10mm |
Length | 10 Feet |
Usage/Application | Residential & Commercial |
Color | Silver |
Material | aluminium |
Brand | any |
Type | any |
Size | any |
Usage/Application | recycling |
Packaging Type | any |
Material | Gypsum |
Surface Treatment | Coated |
Length | 8 Feet |
Shape | Square |
Thickness | 4 mm to 6 mm |
Width | 4 Feet |
Minimum Order Quantity | 500 Square Feet |
Material | Aluminium |
Brand | Indian Extrusions |
Color | Silver |
Length | 1 Meter |
Shape | Rectangle |
Minimum Order Quantity | 5 Meter |
Material | Aluminum |
Shape | Angle |
Thickness | 1.0-1.4 mm |
Indian Extrusions Finish | Thermal Break |
Shape | Coil |
Thickness | Any Thickness |
Brand | Indian Extrusions,Indian Extrusions,Indian Extrusions |
Material | Aluminium |
Color | Silver |
Size | Any Size |
Weight | 350 |
Packaging Type | Company Pack |
Usage/Application | Fabrication,Insulation,Machine Body Building |
Minimum Order Quantity | 100 Kilogram |
Material | Aluminium |
Model Number | G-2083 |
Material | Aluminum |
Surface Treatment | Polished |
Tensile Strength | Upto 50 Mpa |
Usage/Application | Construction |
Thickness | 5mm |
Minimum Order Quantity | 100 Feet |
Brand | Indian Extrusions |
Material | Aluminium |
Thickness | 0.08mm |
Minimum Order Quantity | 50 Kilogram |
Usage/Application | Door And Windows |
Material | Aluminium |
Is It Anodised | Anodised |
Finish | Polished |
Corrosion Resistance | Yes |
Brand | Modular |
Material | Plastic |
Alloy Or Not | Non-Alloy |
Minimum Order Quantity | 10 No |
Shape | T-Profile |
Dimensions | 40x40 mm |
Material | Aluminium |
Position | Used for machine front side |
Alloy Or Not | Is Alloy |
Weight | 1.5 kg per meter |
Application | Used for industrial applications & Home Racks, doors etc.. |
Surface Treatment | Matte |
Warranty | 1 year |
Is It Anodised | Anodised |
Minimum Order Quantity | 1 Meter |
Brand | Wudnox |
Length | 3 m |
Thickness | 3-4 mm |
Condition | New |
Item Code | 30x30 |
Brand | Indian Extrusions + Indian Extrusions |
Dimensions | 30x30 |
Design | Germany |
Anodised | Yes |
Material | Aluminum |
Shape | T-Profile |
Alloy Or Not | Is Alloy |
Color | natural anodizing process |
Usage/Application | Industrial machines |
Surface Treatment | natural anodizing process |
Material Grade | 6063 | RK Rose+Krieger, a member of Phoenix Mecano group located in Minden, Germany, for over 40 years is a world's leading supplier of assembly and positioning components and systems. With its wide range of components starting from aluminium extruded profile assembly system to linear motion units and positioning ...Missing: f30x30
Brand | Indian Extrusions |
Material | Aluminum |
Is It Rust Proof | Rust Proof |
Length | 15 Feet |
Thickness | 1-3 mm |
Shape | Angle |
Dimensions | 25 to 150 mm |
Grade Series | 1000 |
Length | 12 Feet |
Material | Aluminium |
Sheet Brand | Indian Extrusions |
We manufacture Aluminium fascias for individual product, project or as part of a combined system – uniquely designed, specified and fabricated for your specific project needs.
Aluminium fascias can act as a cladding, wrapped around a concealed gutter or act as a stand-alone fascia incorporating an external gutter.
While Aluminium metal offers high water and air resistance. The additional corrosion resistant qualities make Aluminium fascias incredibly low maintenance with a long lifespan. Unlike other materials, swelling, cracking, and rotting is simply not possible with Aluminium fascias.
Aluminum fascia and soffit panels offer a budget-friendly solution, particularly over the long haul, requiring minimal upkeep and boasting superior durability compared to alternative materials. Tailored dimensions and profiles are also at your disposal upon request. Feel free to reach out to us for pricing details. We guarantee you the best pricing in the industry for Aluminium fascias.
Select a high-quality paint specifically formulated for aluminum fascia. Choose a 100% acrylic paint without ammonia, ensuring compatibility with your primer and enamel. Opt for a variant with UV protection to enhance paint longevity and minimize sun-induced damage to your gutters.
To safeguard surrounding surfaces during soffit and fascia painting, consider using drop cloths or painter's tape. Apply one or two coats of paint until achieving the desired outcome.
When dealing with Aluminum Fascia or any trim profile with an exposed surface exceeding 8 inches, enhance its rigidity by incorporating a rib. Begin by orienting the show side upward and executing an initial 30-degree bend. Rotate the piece, now with the show side facing downward, and introduce another 30-degree angle. Reverse the orientation once more, folding it back by approximately 30 degrees to align the fascia's face in a straight configuration. It's worth noting that the cumulative angle of 30 degrees thrice may not equate to 180 degrees due to the shifting reference point with each bend.
The drawbacks associated with Wood Fascia lead numerous property owners to explore Aluminum Fascia as a viable alternative. Opting for aluminum fascia and soffit proves advantageous due to its lightweight nature and minimal maintenance requirements. High-quality aluminum materials resist corrosion, fading, and cracking, even when subjected to harsh weather conditions.
To cut aluminum fascia lengthwise, a straightforward method involves scoring the panel with a scoring knife and then bending the panel back and forth until the metal breaks along the scored line. It's important to wear goggles, especially when cross-cutting with a power saw, to ensure safety during the cutting process. This technique allows for a clean and controlled cut along the desired length of the aluminum fascia.
Cleaning Aluminium Fascis is simple and starightforward. A soft bristle brush is all that's required for regular cleaning. For more stubborn dirt on soffits and fascia, you can utilize a mixture of water and common household detergent with the soft bristle brush, effectively removing any pollutants without causing harm to the surface.
You should always use a "nail-less" installation technique for installing Aluminium Fascia. This involves securing F-channel to the bottom edge of the subfascia and utility trim beneath the drip edge, ensuring a secure hold on the fascia material while allowing flexibility for expansion and contraction with temperature changes (see Figure 2).
Create locking tabs on the top edge of preformed fascia using a snap-lock punch, and then insert the fascia into the utility trim. These tabs serve to prevent the fascia from dislodging while still permitting unrestricted movement. Many contractors opt to shape their fascia on-site using painted aluminum coil stock, which is thinner than factory fascia (.019 vs. .024 inch thick). In such cases, it is essential to form a continuous locking hem on the top edge and insert it into the utility trim.
To prevent the downward movement of rake fascia, slot punch the bottom edge of the fascia and secure it in place with three or four aluminum trim nails driven into the subfascia. These slots enable longitudinal expansion and contraction of the fascia without causing buckling.
It is crucial to avoid having aluminum fascia make sharp turns at corners. Instead, incorporate small inserts at all inside and outside corners, breaking the fascia at these points. These inserts serve as a backdrop, concealing the wood subfascia and maintaining a seamless appearance at corner joints.
For optimal installation of aluminum fascia, especially in darker colors, it is crucial to conduct the installation on a hot day with direct sunlight on the fascia. This precaution ensures that the fascia has expanded to its maximum extent before being installed. The goal is to avoid any limitations on expansion post-installation, as restricted expansion is a common cause of waviness in the fascia.
Yes, aluminum fascia can be secured using staples. According to the instructions you provided, you can secure the aluminum soffit panels to the bottom of the fascia board using either 1-inch aluminum trim nails or staples. The key is to use these fasteners to ensure a secure and flush installation of the panels. Always follow the specific guidelines and recommendations provided by the manufacturer for the best results and to maintain the structural integrity of the installation.
Material | Aluminium |
Thickness | 1-5 mm |
Anodised | Yes |
Weight | 200-500 gram |
Surface Treatment | Powder Coated |
Color | White |
Corrosion Resistant | Yes |
Frame Thickness | 5-7mm |
Material | Aluminium |
Shape | Rectangular |
Surface Finish | Powder Coated |
Shape | V |
Material | Aluminium |
Features | Corrosion Resistant |
Surface Treatment | Anodised |
Size | 20x3mm,32x3mm,40x3mm,50x3,63x3mm,75x3mm,100x3mm |
Brand | Indian Extrusions |
Dimensions | 20 x 20 mm |
Material | Aluminum |
Application | Conveyors, Work Bench, Machine Frames etc. |
Length | Upto 6 m |
Material | Aluminium |
Surface Finishing | Matte |
Weight | 1.3 Kgs per meter |
Dimensions | 40x40 mm |
Strength | 100 |
Temper | T6 |
Is It Anodized | Anodized |
Warranty | 1 year |
Panel Depth | 1.5 to 2.00 mm |
Usage/Application | Used for industrial applications,Fixtures & Racks etc.. |
Minimum Order Quantity | 1 Unit |
Color | White |
Material | Aluminium |
Shape | Square |
Surface Treatment | Powder Coated |
Size | 2X2 Feet |
Thickness | 18 gauge |
Material | Aluminum, Glass |
Frame Color | Grey |
Thickness | 1.2-1.5 mm |
Usage/Application | Office |
Surface Finished | Polished |
Material | PLPB / Indian Extrusions / Ply-Laminate |
Material | Aluminium |
Application | Window |
Corrosion Resistant | Yes |
Length | Upto 15 Feet |
Surface Finish | Powder Coated |
Usage/Application | Between Tiles for Floor & Wall |
Shape | Square |
Position | Interior, Exterior |
Alloy Or Not | Is Alloy |
Material | Aluminium |
Application | Door & Window |
Corrosion Resistant | Yes |
Length | Upto 10 Feet |
Surface Finish | Powder Coated |
Material | Aluminium |
Application | Door & Window |
Corrosion Resistant | Yes |
Length | Upto 15 Feet |
Surface Finish | Powder Coated |
Usage/Application | Office |
Material | Aluminium and Glass |
Open Style | Hinged |
Surface Treatment | Color Coated |
Pattern | Plain |
Brand | Indian Extrusions |
IP Rating | IP20 |
Model No. | NLP-1515 |
Body Material | ALUMINIUM |
Available Length | 2M |
Size | 15mm*15mm |
Minimum Order Quantity | 120 Meter |
Surface Treatment | Polished |
Thickness | 0.25-1.50 mm |
Brand | Indian Extrusions |
Material | Aluminium |
Corrosion Resistance | Yes |
Width | 2-4 Feet |
Brand | Indian Extrusions |
Thickness | 12.5mm |
Color | Off White |
Length | 1800 |
Width | 1200 |
Minimum Order Quantity | 10 Piece |
Material | aluminium |
Brand | any |
Type | any |
Size | any |
Usage/Application | recycling |
Packaging Type | any |
We are one of the renowned and well-known firms of the industry which are extensively engaged in providing several kinds of supreme quality Indian Extrusions Aluminium Extrusions in the market. These products are manufactured using quality tested production materials.
Features:
Low maintenance
High usability
User friendly installation
High performance
Application approved design
Enhanced durability
>
>
>
Call for latest price: +919591811888
Frame Material | Aluminum |
Surface Treatment | PE Coated |
Open Style | Hinged |
Usage/Application | Office Partiton |
Length | 10-12 Feet |
Material | Aluminium |
Design | Decorative |
Application | Office |
Aluminium Sheet Length | 2-5 Feet |
Brand | Indian Extrusions |
Anodised | Yes |
Shape | Flat |
Position | Interior |
Brand | Indian Extrusions |
Alloy Or Not | Non-Alloy |
Material | Aluminium 6063 6061 |
Length | As per customer choices |
Usage/Application | Home and Office |
Shape | Rectangular |
Material | Aluminium |
Position | Interior, Exterior |
Alloy Or Not | Is Alloy |
Shape | Angle |
Grade | 1000 Series, 2000 Series, 3000 Series, 4000 Series |
Position | Interior |
Alloy Or Not | Is Alloy |
Colour | Silver, Indian Extrusions, Yellow |
Color | All |
Material Grade | Standard |
Is It Anodised | Anodised |
Application | ISO |
Color | White |
Frame Material | Aluminum |
Shape | Rectangular |
Surface Treatment | Polished |
Appearance | Modern |
Opening Pattern | Hinge |
Position | Window |
Open Style | Hinged |
Glass Thickness | 5-15mm |
Size/Dimension | 5 Feet X 3 Feet |
Frame Material | Aluminium |
Application | Home, Hotel, Office |
Thickness | 2.5 mm |
Usage/Application | Industrial |
Shape | C-Profile |
Material | Aluminium |
Alloy Or Not | Is Alloy |
Tolerance (mm) | 4.5-6 mm |
Thickness(millimetre) | 2-5mm |
Material | Aluminum |
Color | Silver |
Packaging Type | Roll |
Material | Aluminium |
Finish | Polished |
Thickness | 5-10 mm |
Usage | Construction |
Feature | Easy to install |
Frame Color | Grey |
Surface Finish | Powder Coated |